GSC Power-Division S2 cams for the Mitsu Evo 1-3 and first and second Gen DSM cars. The S2 cams are designed for those running larger turbo's 61mm and larger.Gains of 30-65whp (depending on Turbo) have been seen by simply bolting the S2 cams in. Designed for a rev range of 4000-9000rpms, upgraded valve springs strongly suggested. 450-800whp camshaft. Idle is rougher than stock.

S2 Specs gsc-6003S2

	Intake	Exhaust	Part Number	6003 S2
Advertised Duration	274	274	Make	Mitsu
Peak Lift	11.2	11	Model	Evo 1-3
Valve Clearance	HYD	HYD
Cam Lift	.255"	.251"
Rocker Ratio	1.73	1.73
Valve Lift (net)	.441"	.434"
Duration @ .040" Valve Lift	230	230	Lobe Separation	Overlap
Centerline @ Peak Lift	107 ATDC	113 BTDC	110	8

GSC Designed for top end power, 400-700whp

Specifications:
Intake 274 11.20mm / Exhaust 274 11.00mm