Home > AEM > Fuel Pumps >

  AEM High Flow In-Tank Fuel Pump 320lph up to 1000hp F90000262



 
Alternative Views:


Our Price: $99.98

Product Code: 50-1000
Qty:

Description
 

AEM High Flow In-Tank Fuel Pump 320lph up to 1000hp F90000262


AEMâ??s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.

The AEM High Flow In-Tank Fuel Pump (PN 50-1000) flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Click on the flow curves and current draw vs. fuel pressure graphs below for more information.

AEM High Flow In-Tank Fuel Pump Features:

  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In-Tank design
  • Tested to flow 320 lph @ 43 PSI
  • 39mm diameter fits most applications
  • Offset inlet design eases installation
  • Each pump individually tested
  • For gasoline vehicles (pump life may be diminished when used with E85 fuel)
  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead

 

AEM High Flow In-Tank Fuel Pump (PN 50-1000) flow and power graph (in PSI) at average pph, .5 BSFC and .65 BSFC. The data in this graph represents a 10 pump average of results collected in testing at AEM. Every AEM High Flow Fuel Pump is tested for flow, PRV activation, and amperage draw. The horsepower figures in this graph are approximate and will vary based on your vehicleâ??s set-up. The AEM 50-1000 flows 320 lph at 43 PSI. AEMâ??s High Flow In-Tank Fuel Pump has a low current draw even at 80 SPI due to its internal turbine pump design.
AEM 50-1000 High Flow In-Tank Fuel Pump Flow vs Power Graph (Left), LPH vs Pressure (Center) & Current vs Pressure (Right).


AEM High Flow In-Tank Fuel Pump Technical Drawing

AEM High Flow In-Tank Fuel Pump Technical Drawing


AEM High Flow In-Tank Fuel Pump Images

AEM High Flow In-Tank Fuel Pump AEM High Flow In-Tank Fuel Pump AEM High Flow In-Tank Fuel Pump

AEM High Flow In-Tank Fuel Pump AEM High Flow In-Tank Fuel Pump AEM High Flow In-Tank Fuel Pump

TECHNICAL SPECS:

Weight: 10.1oz (285grams)

Outside Diameter: 39mm OD

External Materials: Black plated steel with laser etching

Inlet Fitting: 7.7mm ID, 11.0mm OD

Outlet Fitting: 8 mm hose clamp

PRV Activation: 90 PSI

Impeller Design: Single Scroll Hard Anodized Aluminum Turbine


VOLTAGE SPECS:

Connector Terminal: 6 mm Spade (pos/neg)

Min Voltage Input: 6 volts

Max Voltage Input: 18 volts

Current Draw (40 psi): 12 amps (13.5v)

Current Draw (80 psi): 15 amps (13.5v)


* Power rating given at 43 PSI, 13.5v at the pump with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.


Share your knowledge of this product. Be the first to write a review »
We accept Mastercard, Visa, American Express, and Discover