|
Whiteline Front Sway Bar 22mm Heavy Duty Subaru Forester 2008 BSF10
|
|
Whiteline Rear Sway Bar 22mm X Heavy Duty Blade Adjustable Subaru Forester 2008 BSR35XZ
|
|
Whiteline Rear Sway Bar 20mm Heavy Duty Subaru Forester 2008 BSR49
|
List Price: $219.80 Our Price: $204.74 Savings: $15.06
|
|
|
List Price: $239.80 Our Price: $223.37 Savings: $16.43
|
|
|
List Price: $219.80 Our Price: $204.74 Savings: $15.06
|
|
|
|
|
|
Description:
Engineered to "Activate More Grip", sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Application Notes:
22mm - suits sedan - Non Adjustable
|
Description:
Engineered to "Activate More Grip", sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Application Notes:
22mm - suits all models - supplied with link support brace KBR16- 3 point adjustable
|
Description:
Engineered to "Activate More Grip", sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 20mm fixed position sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Application Notes:
20mm - Non Adjustable
|
|
|
|
Whiteline Rear Sway Bar 24mm Xx Heavy Duty Blade Adjustable Motorsport Subaru Forester 2008 BSR49XXZ
|
|
Whiteline Rear Sway Bar 22mm X Heavy Duty Blade Adjustable Subaru Forester 2008 BSR49XZ
|
|
Whiteline Rear Sway Bar 20mm Heavy Duty Blade Adjustable Subaru Forester 2008 BSR49Z
|
List Price: $299.80 Our Price: $279.26 Savings: $20.54
|
|
|
List Price: $259.80 Our Price: $242.00 Savings: $17.80
|
|
|
List Price: $239.80 Our Price: $223.37 Savings: $16.43
|
|
|
|
|
|
Description:
Engineered to "Activate More Grip", sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Application Notes:
24mm - includes KBR15 sway bar mount support brace - 3 point adjustable MOTORSPORT
|
Description:
Engineered to "Activate More Grip", sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Application Notes:
22mm - includes KBR15 sway bar mount support brace - 3 point adjustable
|
Description:
Engineered to "Activate More Grip", sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 20mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Application Notes:
20mm - includes KBR15 sway bar mount support brace - 3 point adjustable
|
|
|
|
Whiteline Rear Brace Sway Bar Mount Support Subaru Forester 2008 KBR15
|
|
Whiteline Rear Link Bracket Support Sway Bar Assembly Subaru Forester 2008 KBR16
|
|
Whiteline Front Roll Center/Bump Steer Correction Kit Subaru Forester 2008 KCA313
|
List Price: $79.80 Our Price: $74.33 Savings: $5.47
|
|
|
List Price: $39.80 Our Price: $37.07 Savings: $2.73
|
|
|
List Price: $249.80 Our Price: $232.69 Savings: $17.11
|
|
|
|
|
|
Description:
Whiteline's rear sway bar mount support brace increases the stiffness of the rear sway bar mount & reduce the likelihood of bending or cracking of the OE mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.
Application Notes:
Steel 2 Point
|
Description:
KBR16 is a bolt-on brace designed to support & strengthen the original link sway bar mount. It is recommended for all sway bars & critical on uprated aftermarket sway bars.
Application Notes:
Included with Heavy Duty Sway Bar
|
Description:
A must for lowered vehicles, Whiteline roll center and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip and cornering speeds.
Application Notes:
Reduces roll/bump steer essential for lowered cars
|
|
|
|
Whiteline Front Control Arm Upper Inner Bushing (Camber Correction) Subaru Forester 2008 KCA326
|
|
Whiteline Front Control Arm Lower Inner Rear Bushing (Anti-Lift/Caster Correction) Subaru Forester 2008 KCA334
|
|
Whiteline Front Control Arm Lower Inner Rear Bushing (Caster Correction) Subaru Forester 2008 KCA375
|
List Price: $169.80 Our Price: $158.17 Savings: $11.63
|
|
|
List Price: $149.80 Our Price: $139.54 Savings: $10.26
|
|
|
List Price: $109.80 Our Price: $102.28 Savings: $7.52
|
|
|
|
|
|
Description:
Whiteline Adjustable Camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tire life - ultimately improving overall performance. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.
Application Notes:
On-car adjustable allows +/-0.75 Degrees
|
Description:
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front end geometry the new alloy mounts coupled with low compliance synthetic elastomer bushings serve to dramatically sharpen initial turn-in response and reduce understeer.
Application Notes:
Adds +0.5 degrees caster + anti-lift -
|
Description:
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability through increased static caster and dynamic negative camber gain. In addition, synthetic elastomer bushings provide improved steering feedback and braking performance.
Application Notes:
Suits OE Housing Adds +/- 0.5 Degrees Caster
|
|
|
|
Whiteline Rear Control Arm Inner Lock Washers (Toe Correction) Subaru Forester 2008 KCA377
|
|
Whiteline Front Gearbox Positive Shift Kit Bushing Subaru Forester 2008 KDT901
|
|
Whiteline Rear Crossmember Mount Insert Bushing Subaru Forester 2008 KDT902
|
List Price: $44.80 Our Price: $41.73 Savings: $3.07
|
|
|
List Price: $54.80 Our Price: $51.05 Savings: $3.75
|
|
|
List Price: $49.80 Our Price: $46.39 Savings: $3.41
|
|
|
|
|
|
Description:
Removes and locks OEM toe adjustment.
Application Notes:
suits KTA107, KTA108 and aftermarket adjustable arms.
|
Description:
Bang For Your Buck! Whiteline's Positive Shift Kit inserts into the factory gearbox mount and results in a greatly improved shift feel and response by reducing the compliance of the heavily voided factory mount.
Application Notes:
Faster Shift Response
|
Description:
Not your typical remove and replace bushing kit but simple installation means great for the DIYer's. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment & movement which allows a more positive feel from the rear end during cornering.
Application Notes:
Inserts - positive traction kit - locks subframe to body
|
|
|
|
Whiteline Rear Differential Mount In Cradle Insert Bushing Subaru Forester 2008 KDT903
|
|
Whiteline Rear Differential Mount In Cradle Bushing Subaru Forester 2008 KDT906
|
|
Whiteline Rear Crossmember Mount Bushing Subaru Forester 2008 KDT907
|
List Price: $59.80 Our Price: $55.70 Savings: $4.10
|
|
|
List Price: $59.80 Our Price: $55.70 Savings: $4.10
|
|
|
List Price: $249.80 Our Price: $232.69 Savings: $17.11
|
|
|
|
|
|
Description:
Whiteline's differential insert bushings work within the voids of the original factory bushing to ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Application Notes:
Inserts - installs into voiding of original bushings - positive differential retention
|
Description:
Whiteline's differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Application Notes:
Positive Differential Retention Replaces OE Bushing; Postive Power Kit OD = 60mm
|
Description:
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment & movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.
Application Notes:
Postive Traction Kit Locks Subframe To Body
|
|
|
|
Whiteline Rear Sway Bar Link Kit Heavy Duty Adjustable Steel Ball. Adjustable Extra Heavy Duty Subaru Forester 2008 KLC139*
|
|
Whiteline Front Sway Bar Link Assembly Subaru Forester 2008 KLC139
|
|
Whiteline Front Sway Bar Link Assembly Subaru Forester 2008 KLC32
|
List Price: $132.80 Our Price: $123.71 Savings: $9.09
|
|
|
List Price: $132.80 Our Price: $123.71 Savings: $9.09
|
|
|
List Price: $119.80 Our Price: $111.59 Savings: $8.21
|
|
|
|
|
|
Description:
Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Application Notes:
Adjustable extra heavy duty
|
Description:
Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Application Notes:
Pair - Adjustable extra heavy duty
|
Description:
The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise & direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape & bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.
Application Notes:
Replaces OEM ball joint link & OEM style bar only
|
|
|
|
Whiteline Front Brace Strut Tower Subaru Forester 2008 KSB554
|
|
Whiteline Front Brace Strut Tower Subaru Forester 2008 KSB568
|
|
Whiteline Rear Brace Strut Tower Subaru Forester 2008 KSB590Q
|
List Price: $169.80 Our Price: $158.17 Savings: $11.63
|
|
|
List Price: $239.80 Our Price: $223.37 Savings: $16.43
|
|
|
List Price: $179.80 Our Price: $167.48 Savings: $12.32
|
|
|
|
|
|
Description:
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Application Notes:
|
Description:
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Application Notes:
|
Description:
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback. Kit includes quick release clamps.
Application Notes:
Wagon Only - Includes Quick Release Clamp
|
|
|
|
Whiteline Front Brace Strut Tower Subaru Forester 2008 KSB599
|
|
Whiteline Rear Subframe Lock Bolt Kit Subaru Forester 2008 KSB750
|
|
Whiteline Rear Differential Front Support Lock Bushing Subaru Forester 2008 KSB751
|
List Price: $199.80 Our Price: $186.11 Savings: $13.69
|
|
|
List Price: $44.80 Our Price: $41.73 Savings: $3.07
|
|
|
List Price: $44.80 Our Price: $41.73 Savings: $3.07
|
|
|
|
|
|
Description:
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Application Notes:
Large Top Mount Intercooler
|
Description:
KSB750 is designed to lock the rear subframe which allows for more precise alignment of the rear wheels & limits the amount of rear subframe movement under cornering loads which can result in poor dynamic alignment settings. The hardware can easily be installed & removed between motorsport activities. The kit will increase rear NVH as it effectively locks out the rear subframe bushings. It is designed for motorsport use only & should not be used for extended periods as it may lead to premature chassis wear.
Application Notes:
Locks Differential Carrier To Chassis
|
Description:
KSB751 will reduce rear-end float particularly under acceleration. It will also remove drive train slap on hard gear changes while delivering more precise handling & chassis response from the rear. Highly recommended for big power engines & competition work including drag & circuit racing. Note: Will induce NVH.
Application Notes:
Inserts - locks differential support to chassis
|
|
|
|
Whiteline Brace Strut Tower Quick Release Clamp Subaru Forester 2008 KSB790
|
|
Whiteline Front Steering Rack & Pinion Mount Bushing Subaru Forester 2008 KSR202
|
|
Whiteline Front Steering Rack & Pinion Mount Bushing Subaru Forester 2008 KSR207
|
List Price: $24.80 Our Price: $23.10 Savings: $1.70
|
|
|
List Price: $49.80 Our Price: $46.39 Savings: $3.41
|
|
|
List Price: $79.80 Our Price: $74.33 Savings: $5.47
|
|
|
|
|
|
Description:
Whiteline's Quick release clamps allow for quick and easy removal of strut tower braces, a must for any Whiteline strut Brace that is regularly removed so that you can work on the engine. This quick release clamp suits all Whiteline strut tower Braces.
Application Notes:
Allows for quick and easy removal of strut tower brace
|
Description:
Power steering, aggressive wheel alignment geometry, wider wheels and lower profile tires have all put radically increased loadings on the steering systems of modern cars. Add to that engine bat contaminants such as oil leaks that also help to degrade the performance of steering rack mount bushings. Whiteline steering rack mounts are engineered to outlast and enhance steering precision and feedback.
Application Notes:
Mount - 30mm Passanger Side Bracket.
|
Description:
Power steering, aggressive wheel alignment geometry, wider wheels and lower profile tires have all put radically increased loadings on the steering systems of modern cars. Add to that engine bat contaminants such as oil leaks that also help to degrade the performance of steering rack mount bushings. Whiteline steering rack mounts are engineered to outlast and enhance steering precision and feedback.
Application Notes:
Mount - excludes Diesel models - Includes installation tool.
|
|
|
|
Whiteline Rear Control Arm Complete Lower Front Arm Assembly (Toe Correction) Subaru Forester 2008 KTA107
|
|
Whiteline Front Control Arm Lower Inner Front Bushing Subaru Forester 2008 W0506
|
|
Whiteline Rear Trailing Arm Lower Front Bushing Subaru Forester 2008 W0568
|
List Price: $299.80 Our Price: $279.26 Savings: $20.54
|
|
|
List Price: $49.80 Our Price: $46.39 Savings: $3.41
|
|
|
List Price: $89.80 Our Price: $83.65 Savings: $6.15
|
|
|
|
|
|
Description:
This series of adjustable trailing arms are designed to modify factory camber - toe & track on the rear of Subaru Impreza & Liberty. Use KTA107 as an economical solution for lack of rear toe adjustment particularly on Impreza GD-GH (MY01- on) series. This kit is supplied as 2x adjustable front arms & matching rear arm poly bushings. KTA108 & KTA109 utilise 4 complete adjustable arms with performance low compliance bushings. The result is greater range & more precise adjustment & a more direct connection between body & rear suspension delivering more predictable dynamic behavior. Left-right-h& thread adjustment turn-buckle nut allows for easy on-car adjustment.
Application Notes:
Complete new front arms with 50mm adjustment and 4 x rear bushings MOTORSPORT
|
Description:
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Application Notes:
|
Description:
Optimise rear suspension geometry with Whiteline suspension bushings. Often overlooked, Whiteline trailing arm bushings offer superior dynamic alignment precision by controlling excessive movement - providing driver reassurance for more predictable handling.
Application Notes:
|
|
|
|
Whiteline Front Control Arm Lower Inner Rear Bushing Subaru Forester 2008 W51710
|
|
Whiteline Front Control Arm Lower Inner Rear Bushing Subaru Forester 2008 W53353
|
|
Whiteline Rear Control Arm Upper Inner Bushing Subaru Forester 2008 W63225
|
List Price: $119.80 Our Price: $111.59 Savings: $8.21
|
|
|
List Price: $129.80 Our Price: $120.91 Savings: $8.89
|
|
|
List Price: $144.80 Our Price: $134.88 Savings: $9.92
|
|
|
|
|
|
Description:
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Application Notes:
Standard replacement for alignment correction refer "ALIGNMENT" section
|
Description:
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Application Notes:
Standard replacement for alignment correction refer "ALIGNMENT" section
|
Description:
Suffering uneven tire wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle
Application Notes:
Suits outer mounting point only as inner is a spherical bearing
|
|
|
|
Whiteline Rear Differential Support Outrigger Bushing Subaru Forester 2008 W91379
|
|
Whiteline Rear Differential Mount In Cradle Bushing Subaru Forester 2008 W91380
|
|
|
List Price: $89.80 Our Price: $83.65 Savings: $6.15
|
|
|
List Price: $99.80 Our Price: $92.96 Savings: $6.84
|
|
|
|
|
Description:
Whiteline's differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Application Notes:
Front mount
|
Description:
Whiteline's differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Application Notes:
Rear OD = 55mm
|
|
|
