Home > Select Your Car > SUBARU > Forester > X > 2011
Sort By:
Page of 1
Grimmspeed Wiring Harness for Hella Horns 02-14 WRX/STI Grimmspeed T70 Torx Bit Grimmspeed Master Cylinder Brace - Subaru Impreza/WRX/Sti 08+ Subaru Legacy/GT 08-09
Our Price: $127.00
more info
Our Price: $111.00
more info
Our Price: $195.00
more info
Grimmspeed Wiring Harness for Hella Horns 02-14 WRX/STI Grimmspeed T70 Torx Bit Grimmspeed Master Cylinder Brace - Subaru Impreza/WRX/Sti 08+ Subaru Legacy/GT 08-09
When it comes to wiring the Hella Horns that are mounted to your beautiful GrimmSpeed BroTie, we have you covered. After some testing, we determined that the additional few dBs offered by wiring with a relay weren't worth the added headache and potential failure points of a more complex harness using automotive relay, inline fuse and additional wiring directly to your battery. Fully pre-assembled, our simple harness will allow you to plug and play in seconds. Should your heart desire those last few ounces of ear-piercing goodness, our harness can also be adapted for use with a more complex relay harness. Diagrams for that configuration are included in our installation guide below. The hard to find T70 Torx bit is needed to change the transmission fluid on the 04+ WRX, 03+ Legacy, and the 03+ Foresters. For the most part you can not find this at your local hardware store as they typically only carry up to T60 sized bits. So GrimmSpeed comes to the rescue!! Be sure to order one with your transmission cocktail so you have all the right tools you'd need to do the job.


Applications:

  • 03'-12' Forester X
  • 04'-05', 09' Forester XT
  • 03'-06' Legacy GT
  • 07' STI
  • 04'-10' WRX
 		Powdercoated black this brace will outlive your car and win you some style points to boot. Most importantly this brace kit will kill your wimpy pedal feel and give you the immediate and tight response that your performance car deserves and needs when you hit the track or rally. This brace will give you the confidence similar to that of SS braided brake lines with precision stopping. Not to mention street driving just got a whole lot more fun!
Grimmspeed Lightweight Crank Pulley Blue - Subaru All FA/FB Engines Grimmspeed Lightweight Crank Pulley Black - Subaru All FA/FB Engines Grimmspeed Lightweight Crank Pulley Red - Subaru All FA/FB Engines
Our Price: $1,125.00
more info
Our Price: $1,125.00
more info
Our Price: $1,125.00
more info
Grimmspeed Lightweight Crank Pulley Blue - Subaru All FA/FB Engines Grimmspeed Lightweight Crank Pulley Black - Subaru All FA/FB Engines Grimmspeed Lightweight Crank Pulley Red - Subaru All FA/FB Engines
In GrimmSpeed's opinion, the OEM Subaru crank pulley has been a cause for concern ever since its original design. It is relatively heavy, susceptible to catastrophic failure, and quite unsightly. Continuing to use this on cars just wouldn't do. Eliminating rotational mass while maintaining a safe presence can increase reliability and bring faster Rev's! For this Lightweight Crank Pulley GrimmSpeed pulled out all of the stops. CNC machined from 6061 T6 Aluminum this pulley makes no compromise. It weighs in at 3.5lbs lighter than OEM while at the same time increasing its durability. Marked with a timing mark and perfect cut keyway makes this install a breeze. GrimmSpeed designed the pulley with the optimum weight for performance while avoiding misfire CEL's and engine hesitation. In GrimmSpeed's opinion, the OEM Subaru crank pulley has been a cause for concern ever since its original design. It is relatively heavy, susceptible to catastrophic failure, and quite unsightly. Continuing to use this on cars just wouldn't do. Eliminating rotational mass while maintaining a safe presence can increase reliability and bring faster Rev's! For this Lightweight Crank Pulley GrimmSpeed pulled out all of the stops. CNC machined from 6061 T6 Aluminum this pulley makes no compromise. It weighs in at 3.5lbs lighter than OEM while at the same time increasing its durability. Marked with a timing mark and perfect cut keyway makes this install a breeze. GrimmSpeed designed the pulley with the optimum weight for performance while avoiding misfire CEL's and engine hesitation. In GrimmSpeed's opinion, the OEM Subaru crank pulley has been a cause for concern ever since its original design. It is relatively heavy, susceptible to catastrophic failure, and quite unsightly. Continuing to use this on cars just wouldn't do. Eliminating rotational mass while maintaining a safe presence can increase reliability and bring faster Rev's! For this Lightweight Crank Pulley GrimmSpeed pulled out all of the stops. CNC machined from 6061 T6 Aluminum this pulley makes no compromise. It weighs in at 3.5lbs lighter than OEM while at the same time increasing its durability. Marked with a timing mark and perfect cut keyway makes this install a breeze. GrimmSpeed designed the pulley with the optimum weight for performance while avoiding misfire CEL's and engine hesitation.
Grimmspeed Battery Tie Down - Subaru Impreza/WRX/Sti/Legacy/Forester/Baja/BRZ and Scion FR-S
Our Price: $155.00
more info
Grimmspeed Battery Tie Down - Subaru Impreza/WRX/Sti/Legacy/Forester/Baja/BRZ and Scion FR-S
Clean up that engine bay and show your boxer pride with our new Battery Tie Down. GrimmSpeed started out with a block of 6061 Aluminum, threw in a bunch of CNC Milling time, dropped it in the anodizing tank for a custom matte finish, and then on top of that we found an expert painter to individually hand paint the red into each GrimmSpeed Battery Tie Down! Yes, its that cool.

Setting the precedent for high-end, it's what you can expect from GrimmSpeed
   
 
We accept Mastercard, Visa, American Express, and Discover