|
Torque Solution Rear Differential Bushings: Chevrolet Camaro 2010+
|
|
Torque Solution DSM Rear Subframe Bushings: 2G Mitsubishi Eclipse / Talon AWD 1995-1999
|
|
Torque Solution Rear Differential Mount Inserts: Mitsubishi Evolution VIII-IX 2003-2006
|
MSRP $104.99 Sale Price: $93.44 Savings: $11.55
|
|
|
MSRP $116.99 Sale Price: $115.69 Savings: $1.30
|
|
|
MSRP $71.99 Sale Price: $57.84 Savings: $14.15
|
|
|
|
|
|
Torque Solution Rear Differential Mount Inserts
Applications: Chevrolet Camaro 2010+
All Torque Solution rear differential mounts are made with both quality and
performance in mind. OEM mounts are made of sub-par material with rubber
bushings that are infamous for deteriorating, cracking, and tearing over
time. Heavy racing or spirited driving tends to speed up that process.
Torque Solution has you covered! Our pins are made out of high
grade 6061 billet aluminum material for weight savings and polyurethane bushings for
long life and consistent performance.
By replacing them with these harder Polyurethane units you are
able to get rid of the unwanted slop and flexing of the stock units
which allows for the power to go into rotating the tires, instead of
flexing the rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ and 7sec e.t. torture tested
-Black anodized
-85A durometer bushings ( Not Solid )
-Limited Lifetime Warranty
|
Torque Solution Rear Subframe Bushing
Applications: Eclipse 1995-1999 / Talon 1995-1998
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Rear Subframe Bushings. This system was designed to reduce movement of the rear subframe. This helps to improve transmission feedback when shifting, and gives the car a more solid feel under hard acceleration. Developed to perform under the most extreme conditions, our Urethane Components bridge the gap between ordinary rubber and cheap plastics used in current aftermarket shifter bushings by offering a unique urethane specifically chosen by Torque Solution engineers to ensure product performance and reliability. All this makes it easy for us to stand behind our products with a Limited Lifetime Warranty.
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Street and track torture tested
-75A durometer bushings
-Life Time Warranty
|
Torque Solution Rear Differential Mount Inserts
Applications: Mitsubishi Evolution VIII-IX 2003-2006
These Solid Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty
|
|
|
|
Torque Solution Solid Rear Differential Mount: Mitsubishi Evolution X MR & GSR 2008+
|
|
Torque Solution Mustache Bar Bushings: Mitsubishi Evolution 8/9
|
|
Torque Solution Urethane Differential Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
MSRP $74.99 Sale Price: $57.84 Savings: $17.15
|
|
|
MSRP $44.99 Sale Price: $40.04 Savings: $4.95
|
|
|
MSRP $54.99 Sale Price: $48.94 Savings: $6.05
|
|
|
|
|
|
Torque Solution Rear Differential Mount
Applications: Mitsubishi Evolution X 2008+
The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-Limited Lifetime Warranty
|
Torque Solution Mustache Bar Inserts
Applications: Mitsubishi Evolution VIII-IX 2003-2006
These Solid Polyurethane bushings are much harder compared to the soft rubber OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts. These replace Mustache bar inserts only. Side diff inserts sold separately.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty
|
Torque Solution Rear Differential Mount Inserts
Applications: Mitsubishi Evolution X GSR & MR
These
Solid Polyurethane bushings are much harder compared to the OEM units.
By replacing them with these harder Polyurethane units you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-95A durometer bushings
-Limited Lifetime Warranty
|
|
|
|
Torque Solution Solid Differential Bushing w/ Urethane Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
|
Torque Solution Solid Differential Side Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
|
Torque Solution Solid Differential Bushing w/ Billet Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
MSRP $124.99 Sale Price: $106.79 Savings: $18.20
|
|
|
MSRP $79.99 Sale Price: $57.84 Savings: $22.15
|
|
|
MSRP $144.99 Sale Price: $106.79 Savings: $38.20
|
|
|
|
|
|
|
Torque Solution Solid Rear Differential Mount w/ Inserts
Applications: Mitsubishi Evolution X GSR & MR
The solid differential mount will eliminate movement of the rear end in
the subframe. By replacing the rubber mount with this solid 6061 billet
unit you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
|
Torque Solution Solid Differential Side Inserts
Applications: Mitsubishi Evolution X GSR & MR
These 6061 Solid Billet bushings are much harder compared to the OEM units.
By replacing them with these Solid Billet Inserts you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Anodized Black 6061 Billet
-Limited Lifetime Warranty
|
Torque Solution Solid Rear Differential Mount w/ Billet Inserts
Applications: Mitsubishi Evolution X GSR & MR
The solid differential mount will eliminate movement of the rear end in
the subframe. By replacing the rubber mount with this solid 6061 billet
unit you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-Limited Lifetime Warranty
These
Solid bushings are much harder compared to the OEM units.
By replacing them with these harder units you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-6061 Anodized Billet
-Limited Lifetime Warranty
|
|
|
|
Torque Solution Mustache Bar Eliminator w/ NO BUSHINGS: Mitsubishi Evo 7/8/9 2001-2006
|
|
Torque Solution Mustache Bar Eliminator w/ Solid Bushings: Mitsubishi Evo 7/8/9 2001-2006
|
|
Torque Solution Mustache Bar Eliminator w/ Urethane Bushings: Mitsubishi Evo 7/8/9 2001-2006
|
MSRP $189.99 Sale Price: $169.09 Savings: $20.90
|
|
|
MSRP $259.99 Sale Price: $222.49 Savings: $37.50
|
|
|
MSRP $249.99 Sale Price: $222.49 Savings: $27.50
|
|
|
|
|
|
Torque Solution Mustache Bar Eliminator
Applications: Mitsubishi Evolution VII-IX 2001-2006
The Torque Solution Mustache Bar Eliminator is designed to eliminate that annoying rear differential "clunk" under hard shifts from the rear of your car. Made from 100% billet 6061 aluminum and CNC machined for accurate tolerances.
*This piece requires SOLID OR URETHANE BUSHINGS!!! We are offering it without the bushings for those of you who may already have the bushings on your car and dont need them but keep in mind they are REQUIRED!!!
-Eliminates the " CLUNK " when shifting hard
-Drops 13lbs off the car
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-Limited Lifetime Warranty
|
Torque Solution Mustache Bar Eliminator
Applications: Mitsubishi Evolution VII-IX 2001-2006
The Torque Solution Mustache Bar Eliminator is designed to eliminate that annoying rear differential "clunk" under hard shifts from the rear of your car. Made from 100% billet 6061 aluminum and CNC machined for accurate tolerances. This piece comes anodized black and includes two solid bushings for the side of the rear differential to allow even less differential movement and clunking.
-Eliminates the " CLUNK " when shifting hard
-Drops 13lbs off the car
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-Limited Lifetime Warranty
|
Torque Solution Mustache Bar Eliminator
Applications: Mitsubishi Evolution VII-IX 2001-2006
The Torque Solution Mustache Bar Eliminator is designed to eliminate that annoying rear differential "clunk" under hard shifts from the rear of your car. Made from 100% billet 6061 aluminum and CNC machined for accurate tolerances. This piece comes anodized black and includes two Urethane bushings for the side of the rear differential to allow even less differential movement and clunking. The urethane bushings are less harsh and transmit less feedback into the cabin then the solid bushings.
-Eliminates the " CLUNK " when shifting hard
-Drops 13lbs off the car
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75a Polyurethane Bushings
-Limited Lifetime Warranty
|
|
|
|
Torque Solution Billet Rear Differential Mount Inserts: Mitsubishi Evolution VIII-IX 2003-2006
|
|
|
|
|
MSRP $69.99 Sale Price: $53.39 Savings: $16.60
|
|
|
|
Torque Solution Billet Rear Differential Mount Inserts
Applications: Mitsubishi Evolution VIII-IX 2003-2006
These billet bushings are solid compared to the OEM rubber units. By replacing them with these 6061 Billet Pieces you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-6061 Anodized Billet
-Limited Lifetime Warranty
|
|
|
