|
Hawk HP Plus Rear Brake Pads for EVO X HB615N.535
|
|
Hawk HP Plus Front Brake Pads for EVO X HB453N.585S
|
|
Ferodo DS2500 Rear Pads for EVO X FCP4168H
|
|
|
|
|
|
|
|
Hawk HP Plus Rear Brake Pads for EVO X HB615N.535
HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials. Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.
|
Hawk HP Plus Front Brake Pads for EVO X HB453N.585S
HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials. Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.
|
Ferodo DS2500 Rear Pads for EVO X FCP4168H
This race developed pad has all the qualities of a world beating high performance street pad. Its consistent coefficient of friction (0.50) at any temperature, low or high, gives very predictable braking and great pedal modulation. This new generation of friction material is very low in compressibility ensuring a firm pedal feel while still providing great life for both rotor and pad. This brake pad has moderate dust levels and can make a little noise if not bedded properly but is the brake pad for a driver who demands the ultimate in braking performance.
A quantity of 1 is for an axle set (4 pads).
|
|
|
|
Ferodo DS2500 Front Pads for EVO X FCP1334H-3
|
|
Mitsubishi OEM DOT 3 Brake Fluid - EVO 8 / 9 / X MZ311987
|
|
STM Front Drag Brake Kit Evolution X
|
|
|
|
|
|
|
|
Ferodo DS2500 Front Pads for EVO X FCP1334H-3
This race developed pad has all the qualities of a world beating high performance street pad. Its consistent coefficient of friction (0.50) at any temperature, low or high, gives very predictable braking and great pedal modulation. This new generation of friction material is very low in compressibility ensuring a firm pedal feel while still providing great life for both rotor and pad. This brake pad has moderate dust levels and can make a little noise if not bedded properly but is the brake pad for a driver who demands the ultimate in braking performance.
A quantity of 1 is for an axle set (4 pads).
|
Mitsubishi OEM DOT 3 Brake Fluid - EVO 8 / 9 / X MZ311987
This is genuine Mitsubishi OEM fluid, the same DOT 3 brake fluid Mitsubishi put in your car from the factory!
TECH TIP: Price is for a standard 354ml bottle.
Fits: Mitsubishi Lancer Evolution VIII, IX, X
Part # MZ311987
|
STM Front Drag Brake Kit Evolution X
STM Front Drag Brake Kits for Evolution X allow you to ditch the weight of your big, heavy Brembos and rotors and clears room to run smaller wheels and slicks.
This brake set-up is specifically designed for Drag Racing.
This is not intended for constant, on/off braking as in road-racing or autocross.
Evo X Rotor Specs:
Stock Rotor: 24.30 pounds
STM Standard Rotor: 9.30 pounds
STM Scalloped Rotor: 6.55 pounds
Savings of up to 35.5 pounds of rotating mass in the front!
The Willwood Calipers are 14 pounds less than the factory Evo X Brembos, combined with the savings from the rotors we have a total of up to 49.5 pounds off the front of the car!
STM Front Brake Kit Includes:
- Wilwood 4 Piston Calipers
- Wilwood Street Brake Pads
- Choice of Wilwood Rotor (Standard or Scalloped)
- Black Anodized Hat Color
- STM Brake Lines
- Mounting Brackets
- Mounting Hardware
|
|
|
|
STM FRONT DRAG BRAKE KIT EVO X
|
|
|
|
|
|
|
|
STM Front Drag Brake Kit
- Evolution X
STM Front Drag Brake Kits for Evo X allow you to ditch the weight of your big, heavy Brembos and rotors and clears room to run 15" wheels and slicks for drag racing applications. We all know less rotating mass is the best way to free up power! The STM brake kits inlcude Wilwood calipers and your choice of the standard rotor or the lightweight scalloped rotor, custom STM aluminum mounting brackets, black anodized rotor hats, STM brake lines and all mounting hardware.
|
|
|
