|
STM FUEL RAIL FITTINGS -6AN INLET EVO 8/9 stm-6anfuelevo8
|
|
STM ALUMINUM -8AN FUEL RAIL FITTING EVO 8/9 & 95-99 DSM stm-8anfuelfitevo8
|
|
Deatschwerks Fuel Pump Hardwire Installation Kit dwFPHWK
|
|
Our Price: $25.00
|
|
|
|
Our Price: $35.00
|
|
|
|
Our Price: $39.00
|
|
|
|
|
|
|
Our STM -6AN aluminum fuel rail fittings for the 90-99 DSM and Evo VIII-IX are machined in Rochester, NY and will include 2 stainless allan cap bolts and lock washers to fasten to your fuel rail.
Evo VIII-IX and 95-99 DSM use the short fitting pictured left as both inlet and outlet.
90-94 DSM use the short fitting as the inlet, the longer as the outlet.
|
Our STM -8AN aluminum fuel rail fitting for the 95-99 DSM and Evo VIII-IX are machined in Rochester, NY and will include 2 stainless allan cap bolts and lock washers to fasten to your -8AN fuel rail.
|
Get the most out of your DW301 or other high flow fuel pump by ensuring it is getting the voltage it needs. Old, compromised OE wiring can limit the voltage your fuel pump receives. Our hardwire kit includes everything you need to safely, easily, and reliably wire your pump directly to your battery, ensuring no matter how hard you push your pump, your wiring will be up to the task. We especially recommend this kit for use in cars over 10 years old, cars making over 400whp, and cars which were originally not designed for high horsepower. See Below for kit contents:
- 15' of 12ga SLX spec red power cable
- 5' of 12ga SLX spec black ground cable
- 30 amp in-line fuse
- 40 amp automotive relay
- 4-lead relay socket with pigtails
- Install instructions
- DW window decal
|
|
|
|
Walbro Fuel Pump Kit 255lph walbrokit
|
|
Deatschwerks DW200 Series 255lph Fuel Pump with Install Kit (DSM 2G AWD & Evo 8/9) DW9-201-0847[DEA-9-201/9-0847]
|
|
Mitsubishi Evolution 8 & 9 AEM High Volume Fuel Rail aemrail 8/9
|
|
Our Price: $95.00
|
|
|
|
Our Price: $99.00
|
|
|
|
Our Price: $119.00
|
|
|
|
|
|
|
Walbro High Pressure In-tank Fuel Pump provides easy replacement and supports 255lph.
|
The new DW200 series pumps flow at 255lph and offer the following benefits:
- 100% compatibility with ethanol fuel
- 3 year no-fault warranty
- Flow testing with custom report
- Application specific fitment
|
AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower.
|
|
|
|
Mitsubishi Evolution 8 & 9 AEM High Volume Fuel Rail aerorail 8/9
|
|
Walbro High-Pressure 400lph In-tank Fuel Pump F90000262
|
|
Deatschwerks Mitsubishi Lancer Evolution VIII/IX 300+ LPH In-Tank Fuel Pump [9-301-0847] 9-301-0847
|
|
Our Price: $159.00
|
|
|
|
Our Price: $159.00
|
|
|
|
Our Price: $169.00
|
|
|
|
|
|
|
This high flow billet fuel rail is a direct replacement for the factory EVO VII / IX fuel rail.
|
Designed for engines with more than 500hp
Award-winning OE technology
High-pressure, high-flow performance
Requires modification to wiring, fuel lines and fuel module (Professional installation recommended)
Outperforms all current market in-tank fuel pumps
|
Outflow the Competition. Introducing the highest flowing in-tank pump yet. Surpassing the competition 300LPH at a time.
- Flows 300+ litres per hour
- In-tank application specific fitment
- Ethanol compatible
- 3-year no-fault warranty
- Quiet and reliable turbine impeller
includes
- 2"x2" sock
- Electrical connector
- 4" of fuel line
- Miscellaneous hardware
|
|
|
|
Deatschwerks 300lph High Flow In-tank Fuel Pump DW300 DEA-DW-300-1-and-9-0847
|
|
Mitsubishi Evolution 8 & 9 Buschur Racing Fuel Rail brfuelrail
|
|
AMS Mitsubishi Lancer Evolution IV/V/VI/VII/VIII/IX Fuel Rail AMS 8/9 fuel rail
|
|
Our Price: $169.00
|
|
|
|
Our Price: $180.00
|
|
|
|
Our Price: $186.15
|
|
|
|
|
|
|
This kit includes a Fuelab adjustable fuel pressure regulator, black face fuel pressure gauge, fuel rail adapter, 4' of fuel line, and all necessary fittings to accurately adjust and monitor fuel pressure in your Evo! We recently switched to black and silver shadow series fittings and black push lock line (if selected) for a cleaner sleeper look under the hood!
|
An upgraded fuel rail is nessecary if you're going for big power and high boost in your Evolution. Thats why Buschur Racing offers this aluminum CNC machined fuel rail for the Mitsubishi Evolution.
|
The AMS EVO IV/V/VI/VII/VIII/IX Fuel Rail provides increased fuel flow which is necessary at higher boost levels. This CNC’d aluminum rail comes anodized in Red, Black or Silver and includes our signature AMS turbo logo. With a 13mm diameter inlet and outlet it dwarfs the stock rail by over 160% in flow area. This is true bolt on part that will install with your factory fuel lines, fuel pressure regulator and works with all factory style fuel injectors. In addition it comes with a 1/8” NPT port where you can mount a fuel pressure gauge or use it for an auxiliary fuel port.
|
|
|
|
AMS Mitsubishi Lancer Evolution VII/VIII/IX Race Fuel Rail AMS 8/9 RACE FUEL RAIL
|
|
MAP AFPR Install Kit with Fuelab Regulator (Evo 8 & 9) - Original w/ Push Lock Hose MAP-AFPR-PL-EVO-51502
|
|
MAP AFPR Install Kit with Fuelab Regulator (Evo 8 & 9) - Original w/ Braided Stainless Steel MAP-AFPR-PL-EVO-51502-braid
|
|
Our Price: $195.95
|
|
|
|
Our Price: $208.99
|
|
|
|
Our Price: $218.99
|
|
|
|
|
|
|
The AMS EVO IV-IX Race Fuel Rail provides increased fuel flow which is necessary at higher boost levels. This CNC’d aluminum rail comes anodized in Red, Black or Silver and includes our signature AMS turbo logo. With a 3/8” female threaded ends and 13mm diameter inlet and outlet it dwarfs the stock rail by over 160% in flow area. This is the perfect rail to be used in conjunction with a custom high horsepower fuel system. In addition it comes with a 1/8” NPT port where you can mount a fuel pressure gauge or use it for an auxiliary fuel port.
|
This kit includes a Fuelab adjustable fuel pressure regulator, black face fuel pressure gauge, fuel rail adapter, 4' of fuel line, and all necessary fittings to accurately adjust and monitor fuel pressure in your Evo! We recently switched to black and silver shadow series fittings and black push lock line (if selected) for a cleaner sleeper look under the hood!
|
This kit includes a Fuelab adjustable fuel pressure regulator, black face fuel pressure gauge, fuel rail adapter, 4' of fuel line, and all necessary fittings to accurately adjust and monitor fuel pressure in your Evo! We recently switched to black and silver shadow series fittings and black push lock line (if selected) for a cleaner sleeper look under the hood!
|
|
|
|
MAP AFPR Install Kit with Fuelab Regulator (Evo 8 & 9) - Mini w/ Push Lock Style MAP-AFPR-PL-EVO-53501-push
|
|
MAP AFPR Install Kit with Fuelab Regulator (Evo 8 & 9) - Mini w/ Braided Stainless Steel MAP-AFPR-PL-EVO-53501-braid
|
|
Mitsubishi Evolution 8 & 9 Buschur Racing Twin Feed Kit brtwinfeed
|
|
Our Price: $218.99
|
|
|
|
Our Price: $228.99
|
|
|
|
Our Price: $285.00
|
|
|
|
|
|
|
This kit includes a Fuelab adjustable fuel pressure regulator, black face fuel pressure gauge, fuel rail adapter, 4' of fuel line, and all necessary fittings to accurately adjust and monitor fuel pressure in your Evo! We recently switched to black and silver shadow series fittings and black push lock line (if selected) for a cleaner sleeper look under the hood!
|
This kit includes a Fuelab adjustable fuel pressure regulator, black face fuel pressure gauge, fuel rail adapter, 4' of fuel line, and all necessary fittings to accurately adjust and monitor fuel pressure in your Evo! We recently switched to black and silver shadow series fittings and black push lock line (if selected) for a cleaner sleeper look under the hood!
|
With continuing to push the limits of the Evolution sooner or later we
knew more fuel would be required. A single Walbro just wasnt going to
cut it.
|
|
|
|
Mitsubishi Evolution 8 / 9 & DSM Precision Turbo Fuel Injectors 880cc ptefuelinjector 880
|
|
Mitsubishi Evolution 8 / 9 & DSM Precision Turbo Fuel Injectors 680cc ptefuelinjector 680
|
|
FIC 750cc Mitsubishi EVO 8/9 & DSM Injector Set (Low-Z) IS125-0750
|
|
Our Price: $285.00
|
|
|
|
Our Price: $285.00
|
|
|
|
Our Price: $289.00
|
|
|
|
|
|
|
Precision Injectors for all Mitsubishi's. These are all low impedance and ball and seat.
|
Precision Injectors for all Mitsubishi's. These are all low impedance and ball and seat.
|
Mitsubishi DSM Injector Set: 4 x 750cc Peak & Hold / Low Impedance Ball & Seat Injectors
|
|
|
|
Mitsubishi Evolution 8 / 9 & DSM Precision Turbo Fuel Injectors 1000cc ptefuelinjector 1000
|
|
FIC 850cc Mitsubishi EVO 8/9 & DSM Injector Set (Low-Z) IS125-0850
|
|
AMS Mitsubishi Lancer Evolution VII/VIII/IX Fuel Pressure Regulator Kit AMS 8/9 fuel reg kit
|
|
Our Price: $290.00
|
|
|
|
Our Price: $299.00
|
|
|
|
Our Price: $303.75
|
|
|
|
|
|
|
Precision Injectors for all Mitsubishi's. These are all low impedance and ball and seat.
|
Mitsubishi DSM Injector Set: 4 x 850cc Peak & Hold / Low Impedance Ball & Seat Injectors
|
The AMS EVO VII/VIII/IX Fuel Pressure Regulator Kit is designed for anyone running an upgraded fuel pump and or fuel injectors. Whether you are running too rich and need to back off the fuel pressure or if you are running too lean on your current injectors and need to raise base fuel pressure, this is the system for you! A vibration resistant, liquid filled fuel pressure gauge is included allowing you to monitor your fuel pressure. Requires no cutting or modifications to your vehicle for easy installation and/or removal
|
|
|
|
Mitsubishi Evolution 8 / 9 & DSM Precision Turbo Fuel Injectors 1200cc ptefuelinjector 1200
|
|
FIC 950cc Mitsubishi EVO 8/9 & DSM Injector Set (Low-Z) IS125-0950
|
|
FIC 1050cc Mitsubishi EVO 8 /9 & DSM Injector Set (Low-Z) IS125-1050
|
|
Our Price: $320.00
|
|
|
|
Our Price: $325.00
|
|
|
|
Our Price: $345.00
|
|
|
|
|
|
|
Precision Injectors for all Mitsubishi's. These are all low impedance and ball and seat.
|
Mitsubishi EVO Injector Set: 4 x 950cc Peak & Hold / Low Impedance Ball & Seat Injectors - Looking for true 1000cc injectors? See our FAQ's for more info on our custom 1050cc injectors and the great spray pattern they make!
|
Mitsubishi DSM Injector Set: 4 x 1050cc Custom Peak & Hold / Low Impedance Ball & Seat Injectors.
These custom injectors have a great spray pattern!
|
|
|
|
FIC 1150cc Mitsubishi EVO 8 /9 & DSM Injector Set (Low-Z) IS125-1150
|
|
Mitsubishi Evo 8-9 Full Blown Dual Pump Hanger FBMDP-EVO89
|
|
FIC 1250cc Mitsubishi EVO 8 /9 & DSM BlueMAX Injector Set (Low-Z) IS225-1250
|
|
Our Price: $385.00
|
|
|
|
Our Price: $399.00
|
|
|
|
Our Price: $405.00
|
|
|
|
|
|
|
Mitsubishi DSM Injector Set: 4 x 1150cc Custom Peak & Hold / Low Impedance Ball & Seat Injectors.
These custom injectors have a great spray pattern!
|
No more sumping the tanks on your HIGH HP cars!! We've designed a CNC Billet hanger that will mount 2 Intake pumps that's a direct drop into factory fuel tank. Our Dual Pump Hanger is CNC machined from top notch billet aluminum then anodized for a long lasting protective finish. It's capable of up to 600hp on factory fuel rails and higher capacity possible with modified fuel systems. Our system utilizes OEM factory hardware and comes complete with all necessary hardware for installation. Pumps and Hose ends are not included. This kit comes with the AN fittings for the Feed & Return, Clamps, and Submersible hoses from the fuel pump to the hanger. You will have to provide your own stainless lines and hose ends. If you plan on keeping your stock fuel lines make sure you choose that option.
|
Mitsubishi DSM BlueMAX Injector Set: 4 x 1250cc Peak and Hold/Low Impedance Ball & Seat Injectors. Great for E85 applications! One complete set of seals is included with each set of injectors.
|
|
|
|
FIC 900cc (1000cc - see note) Mitsubishi EVO 8/9 & DSM Injector Set (High-Z) IS125-0900H
|
|
FIC 1350cc Mitsubishi EVO 8 /9 & DSM BlueMAX Injector Set (Low-Z) IS225-1350
|
|
Tomei Fuel Rail Mitsubishi EVO VII VIII IX 03-07 183010
|
|
Our Price: $409.00
|
|
|
|
Our Price: $425.00
|
|
|
|
Our Price: $440.00
|
|
|
|
|
|
|
Injector Set: 4 x 900cc Super FAST Lightweight Custom Modified Saturated/High Impedance Ball & Seat Injectors.
|
Mitsubishi DSM BlueMAX Injector Set: 4 x 1350cc Peak and Hold/Low Impedance Ball & Seat Injectors. Great for E85 applications! One complete set of seals is included with each set of injectors.
|
An upgraded fuel rail is necessary for any car making that has a major increase in power over stock. As an engine is upgraded its airflow increases, therefore creating greater demand for fuel, but the factory fuel system can only compensate to a certain point before it simply can’t keep up.
|
|
|
|
FIC 1450cc Mitsubishi EVO 8 /9 & DSM BlueMAX Injector Set (Low-Z) IS225-1450
|
|
Injector Dynamics Evo 8/9 1000cc injector set ID 1000-EVO9
|
|
Mitsubishi Evolution 8 / 9 & DSM Precision Turbo Fuel Injectors 1600cc ptefuelinjector 1600
|
|
Our Price: $445.00
|
|
|
|
Our Price: $460.00
|
|
|
|
Our Price: $480.00
|
|
|
|
|
|
|
Mitsubishi DSM BlueMAX Injector Set: 4 x 1450cc Peak and Hold/Low Impedance Ball & Seat Injectors. Great for E85 applications! One complete set of seals is included with each set of injectors.
|
Injector Dynamics 1000cc high impedence injector set for Mitsubishi EVO-8/9, pricing is per set of 4.
|
Precision Injectors for all Mitsubishi's. These are pintel.
|
|
|
|
FIC 1650cc Mitsubishi EVO 8 /9 & DSM BlueMAX Injector Set (Low-Z) IS225-1650
|
|
FIC 1100cc Mitsubishi EVO 8 / 9 & DSM Injector Set (High-Z) IS125-1100H
|
|
FIC 1750cc Mitsubishi EVO 8 /9 & DSM BlueMAX Injector Set (Low-Z) IS225-1750
|
|
Our Price: $485.00
|
|
|
|
Our Price: $495.00
|
|
|
|
Our Price: $505.00
|
|
|
|
|
|
|
Mitsubishi EVO BlueMAX Injector Set: 4 x 1650cc Peak and Hold/ Low Impedance Ball & Seat Injectors. Great for E85 applications! One complete set of seals is included with each set of injectors.
|
Mitsubishi DSM Injector Set: 4x1100cc Saturated / High Impedance Ball & Seat Injectors. (20% larger than 1000cc Bosch EV14 injectors.)
P&Play fit to OEM harness. Resistor pack removal recommended.
|
Mitsubishi EVO BlueMAX Injector Set: 4 x 1750cc Peak and Hold/ Low Impedance Ball & Seat Injectors. Great for E85 applications! These require 16V input or an injector signal booster. One complete set of seals is included with each set of injectors.
|
|
|
|
Mitsubishi Evolution 8 & 9 Buschur Racing Double Pumper brdoublepumper
|
|
FIC 2150cc Mitsubishi EVO 8/9 & DSM BlueMAX EVO Injector Set (High-Z) IS225-2150H
|
|
Injector Dynamics EVO 8/9 2000cc injector set ID2000-EVO 8/9
|
|
Our Price: $600.00
|
|
|
|
Our Price: $760.00
|
|
|
|
Our Price: $959.80
|
|
|
|
|
|
|
This is the newest addition to our line up of fueling options for the Evolution. This is a TRUE drop in setup and it is all done while retaining the stock fuel lines and sending unit.
|
BlueMAX Injector Set: 4 x 2150cc Saturated / High Impedance Ball & Seat Injectors. Largest high impedance injector ever!
|
Injector Dynamics ID2000 injector set for EVO 8/9
These injectors are NOT compatible with gasolines containing MTBE, specifically VP Q16 and VP Import
|
|
|
|
AMS Mitsubishi Lancer Evolution VII/VIII/IX 1000 HP Fuel System AMS 8/9 1000hp fuel syst
|
|
|
|
|
|
Our Price: $1,514.05
|
|
|
|
|
The AMS Mitsubishi Evolution VII/VIII/IX 1000 HP Evo fuel system is the best alternative to a fuel cell. Our system retains the stock fuel tank so there is no need to cut up your EVO to fit a fuel cell. Featuring dual Walbro fuel pumps and a -8 stainless feed line, this kit will support 1000 horsepower! Unlike some of the competitions kits, our kit retains the factory siphon assembly, this keeps the pump side of the factory saddle tank full of fuel preventing fuel pump starvation. Starving your motor of fuel at 1000 hp will result in catastrophic engine failure.
|
|
|
